1 REV INTERNAL TUBE CUTTERS DESCRIPTION:
The TECO one revolution tube cutter is designed for hand operation using a ratchet or hand wrench of proper size to fit the drive shank of the tool. The cutter bit operates on an eccentric principle. With the cutter bit in the closed position insert the cutter into the tube to be cut. Apply wrench and turn in a clockwise direction. The tool bit will move out and pierce the tube wall. Continued turning and cut the tube off in one revolution. The cutter is then turned counterclockwise slightly to close in the bit allowing the cutter to be removed from the tube.
1 REV INTERNAL TUBE CUTTERS SPECS:
BSA Tube Runner/Pulling: http://www.bsa-regal.co.uk/?category=tuberunner&page=tube-pulling
TECO Expanders: http://www.teco.eu/en/
No customer comments for the moment.